For use with our Heavy Correcting Compound.

Made in 

Looking to correct swirls and scratches in a hurry? This is the pad for you! Use this new 4" Blue Foam Cutting Pad with our color-coded Adam's Heavy Correcting Compound to remove swirls and scratches faster than ever. This pad must be followed with Adam's Paint Correcting Polish and 4" Orange Foam Pad for best results.

As machine polishers have advanced, so have the demands of the pads that attach to them. This is our latest evolution in polishing pad design.

Each aspect of the pad design has been carefully considered to deliver maximum performance, durability, and results. Featuring a high-grip Velcro backing for maximum adhesion and minimal pad slip, these pads will hold tighter to your machine, reducing the chances of an errant pad or mid-polishing delamination in even the most extreme conditions.

We listened to feedback and eliminated the neoprene mid-base section that some users found difficult to avoid putting rubber transfer marks onto the vehicle surface if the side of the pad was accidentally bumped against a panel, which could cause a scare and be somewhat difficult to remove. The convoluted face generates less heat, and the tapered edge design provides stability that will withstand the rigors of high speeds from a cordless drill and Adam's 4" Drill Backing Plate or the oscillations from the Swirl Killer MINI, Cyclo Model 5 or Rupes Mini polishers. They now have a lower price too!

The specially selected blue foam used in the construction of the Adam's 4" Blue Foam Cutting Pad mates up perfectly with the color coordinated Adam's Heavy Correcting Compound to make short work of heavy swirls and scratches, while still finishing clean with low amounts of dust. The blue polishing face has strong cutting power but does need to be followed up with our 4" Orange Foam Pad and Correcting Polish for best results. Extensive testing and development was done to make sure that each aspect of the Adam's 4" Blue Foam Cutting Pad maximizes performance on a variety of polishers, but they are purpose built to maximize performance of the Swirl Killer MINI, Cyclo Model 5 Pro Mark II, Rupes 75e, and Adam's 4" Drill Backing Plate Adapters.